Menu

Wall Control-2 Single Display Qomo Journey Instructions

Wall Control-2 Single Display Qomo Journey Instructions

Printable Version

Updated: 4/10/2020

Control Panel helpful information:

  • Press and hold the power “ON” button until you here a click sound.  This indicates the command is completed.
  • Default will be the “Computer” input. The Display my show a picture in picture on the screen.
    • Touch the small picture in the middle of the panel screen and it will go to full screen.
  • Select Source (computer, document camera, and laptop) to show on the Monitor screen.
  • Press and hold the power “OFF” button until you here a click sound.  This means the command is completed.
  • The bottom row of buttons have “AUDIO” and “MUTE” buttons that will allow you to play audio without turning on the plasma. (NICE!)
  • Push the “AUDIO” button you will have sound and volume control from the device you have chosen. 
  • Push the “MUTE” button and the sound will turn off.  
  • When connecting a “Laptop Computer” with VGA select the “Laptop” source button on the control panel.
  • When connecting a “Laptop Computer” with HDMI select the “HDMI” source button on the control panel.

Control Panel

Qomo Document Camera:

Remote Control

Rot (Rotate the image)
Neg (Display film negatives)
Split (Split Image function)
Ppw (Control the projector On/Standby)
POWER (Control the visualizer On/Off)
CAM/PC1/PC2 (CAM/RGB input signal selection) 4
LAMP (Control the arm lights and back light)
Frz (Freeze the image)
Text (Switch between image/text mode)
Arrows (Move the image up/down)
AUTO (To auto white balance and auto focus)
T/W (Zoom in and out) + -

* Power off the unit by pressing and holding the POWER button until the unit goes off.  Please remember to turn off the Document Camera when you are finished with your class.

Thanks!

Top