Menu

Wall Control-2 Single Display Qomo Quest Instructions

Wall Control-2 Single Display Qomo Quest Instructions

Printable Version

Updated: 4/10/2020

Control Panel helpful information:

  • Press and hold the power “ON” button until you hear a click sound.  This indicates the command is completed.
  • Select Source (computer, document camera, and laptop) to show on the Display.
  • Press and hold the power “OFF” button until you hear a click sound.  This means the command is completed.
  • The bottom row of buttons have “AUDIO” and “MUTE” buttons that will allow you to play audio without turning on the Display. (NICE!)
  • Push the “AUDIO” button you will have sound and volume control from the device you have chosen.
  • Push the “MUTE” button and the sound will turn off.  
  • When connecting a “Laptop Computer” with VGA select the “Laptop” source button on the control panel.
  • When connecting a “Laptop Computer” with HDMI select the “HDMI” source button on the control panel.

Control Panel

Qomo Document Camera:

Remote Controls

Rot (Rotate the image)
Neg (Display film negatives)
Split (Split Image function)
Ppw (Control the projector On/Standby)
POWER (Control the visualizer On/Off)
CAM/PC1/PC2 (CAM/RGB input signal selection) 4
LAMP (Control the arm lights and back light)
Frz (Freeze the image)
Text (Switch between image/text mode)
Arrows (Move the image up/down)
AUTO (To auto white balance and auto focus)
T/W (Zoom in and out) + -
Top