Menu

Wall Control-2 Single Display Instructions

Wall Control-2 Single Display Instructions

Printable Version

Upated: 4/10/2020

Control Panel helpful information:

  • Press and hold the power “ON” button until you hear a click sound.  This indicates the command is completed.
  • Select Source (computer, document camera, and laptop) to show the Display.
  • Press and hold the power “OFF” button until you hear a click sound. (meaning the command is completed)
  • The bottom row of buttons have “AUDIO” and “MUTE” buttons that will allow you to play audio without turning on the panel. (NICE!)
  • Push the “AUDIO” button you will have sound and volume control from the device you have chosen.
  • Push the “MUTE” button and the sound will turn off.  
  • When connecting a “Laptop Computer” with VGA select the “Laptop” source button on the control panel.
  • When connecting a “Laptop Computer” with HDMI select the “HDMI” source button on the control panel.

Control Panel

Qomo Document Camera:

  • Select options on top/front of unit or remote
    • Please use remote or buttons on unit to operate the camera.
      *Manual operation can damage the Camera Head
    • Use Scroll to move image up/down
    • Use the Lamp button to toggle between the light settings
    • Adjust Bright+- button to improve picture quality
    • Use Auto Focus  button to focus the camera
    • Use Zoom+- buttons to enlarge/shrink images
    • Turn the image by selecting ROTATE button  

*Note when you have adjusted the camera you can lock out the keys on the unit by pressing the POWER button once this will allow you to lean your hand on the buttons while writing on paper and not activating any of the buttons.  When you are finished or would like to adjust the camera you press the POWER button and it will unlock the keys.  Power off the unit by pressing and holding the POWER button until the unit goes off.  Please remember to turn off the Document Camera when you are finished with your class.

Thanks!

Remote Control

Top